Time/Hr.

OSHA Course Title

No.

10

OSHA Standard, Construction Industry .

1

30

OSHA Standard, Construction Industry

2

10

OSHA Standard, General Industry  .

3

30

OSHA Standard, General Industry .

4

 

 

• Part Number: 1926
• Part Title: Safety and Health Regulations for Construction
• Standard Number: 1926
• Title: Table of Contents
• GPO Source: e-CFR

PART 1926 - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION

Subpart A-General

§1926.1 Purpose and scope.
§1926.2 Variances from safety and health standards.
§1926.3 Inspections-right of entry.
§1926.4 Rules of practice for administrative adjudications for enforcement of safety and health standards.
§1926.5 OMB control numbers under the Paperwork Reduction Act.
§1926.6 Incorporation by reference.

Subpart B-General Interpretations

§1926.10 Scope of subpart.
§1926.11 Coverage under section 103 of the act distinguished.
§1926.12 Reorganization Plan No. 14 of 1950.
§1926.13 Interpretation of statutory terms.
§1926.14 Federal contract for "mixed" types of performance.
§1926.15 Relationship to the Service Contract Act; Walsh-Healey Public Contracts Act.
§1926.16 Rules of construction.

Subpart C-General Safety and Health Provisions

§1926.20 General safety and health provisions.
§1926.21 Safety training and education.
§1926.22 Recording and reporting of injuries. [Reserved]
§1926.23 First aid and medical attention.
§1926.24 Fire protection and prevention.
§1926.25 Housekeeping.
§1926.26 Illumination.
§1926.27 Sanitation.
§1926.28 Personal protective equipment.
§1926.29 Acceptable certifications.
§1926.30 Shipbuilding and ship repairing.
§1926.32 Definitions.
§1926.33 Access to employee exposure and medical records.
§1926.34 Means of egress.
§1926.35 Employee emergency action plans.

Subpart D-Occupational Health and Environmental Controls

§1926.50 Medical services and first aid.
§1926.51 Sanitation.
§1926.52 Occupational noise exposure.
§1926.53 Ionizing radiation.
§1926.54 Nonionizing radiation.
§1926.55 Gases, vapors, fumes, dusts, and mists.
§1926.56 Illumination.
§1926.57 Ventilation.
§1926.58 [Reserved]
§1926.59 Hazard communication.
§1926.60 Methylenedianiline.
§1926.61 Retention of DOT markings, placards and labels.
§1926.62 Lead.
§1926.64 Process safety management of highly hazardous chemicals.
§1926.65 Hazardous waste operations and emergency response.
§1926.66 Criteria for design and construction of spray booths.

Subpart E-Personal Protective and Life Saving Equipment

§1926.95 Criteria for personal protective equipment.
§1926.96 Occupational foot protection.
§1926.97 Electrical protective equipment.
§1926.98 [Reserved]
§1926.100 Head protection.
§1926.101 Hearing protection.
§1926.102 Eye and face protection.
§1926.103 Respiratory protection.
§1926.104 Safety belts, lifelines, and lanyards.
§1926.105 Safety nets.
§1926.106 Working over or near water.
§1926.107 Definitions applicable to this subpart.

Subpart F-Fire Protection and Prevention

§1926.150 Fire protection.
§1926.151 Fire prevention.
§1926.152 Flammable liquids.
§1926.153 Liquefied petroleum gas (LP-Gas).
§1926.154 Temporary heating devices.
§1926.155 Definitions applicable to this subpart.

Subpart G-Signs, Signals, and Barricades

§1926.200 Accident prevention signs and tags.
§1926.201 Signaling.
§1926.202 Barricades.
§1926.203 Definitions applicable to this subpart.

Subpart H-Materials Handling, Storage, Use, and Disposal

§1926.250 General requirements for storage.
§1926.251 Rigging equipment for material handling.
§1926.252 Disposal of waste materials.

Subpart I-Tools-Hand and Power

§1926.300 General requirements.
§1926.301 Hand tools.
§1926.302 Power-operated hand tools.
§1926.303 Abrasive wheels and tools.
§1926.304 Woodworking tools.
§1926.305 Jacks-lever and ratchet, screw, and hydraulic.
§1926.306 Air receivers.
§1926.307 Mechanical power-transmission apparatus.

Subpart J-Welding and Cutting

§1926.350 Gas welding and cutting.
§1926.351 Arc welding and cutting.
§1926.352 Fire prevention.
§1926.353 Ventilation and protection in welding, cutting, and heating.
§1926.354 Welding, cutting, and heating in way of preservative coatings.

Subpart K-Electrical

General

§1926.400 Introduction.
§1926.401 [Reserved]

Installation Safety Requirements

§1926.402 Applicability.
§1926.403 General requirements.
§1926.404 Wiring design and protection.
§1926.405 Wiring methods, components, and equipment for general use.
§1926.406 Specific purpose equipment and installations.
§1926.407 Hazardous (classified) locations.
§1926.408 Special systems.
§§1926.409-1926.415 [Reserved]

Safety-Related Work Practices

§1926.416 General requirements.
§1926.417 Lockout and tagging of circuits.
§§1926.418-1926.430 [Reserved]

Safety-Related Maintenance and Environmental Considerations

§1926.431 Maintenance of equipment.
§1926.432 Environmental deterioration of equipment.
§§1926.433-1926.440 [Reserved]

Safety Requirements for Special Equipment

§1926.441 Batteries and battery charging.
§§1926.442-1926.448 [Reserved]

Definitions

§1926.449 Definitions applicable to this subpart.

Subpart L-Scaffolds

§1926.450 Scope, application and definitions applicable to this subpart.
§1926.451 General requirements.
§1926.452 Additional requirements applicable to specific types of scaffolds.
§1926.453 Aerial lifts.
§1926.454 Training requirements.
(Non-mandatory) Appendix A to Subpart L of Part 1926-Scaffold Specifications
(Non-mandatory) Appendix B to Subpart L of Part 1926-Criteria for Determining the Feasibility of Providing Safe Access and Fall Protection for Scaffold Erectors and Dismantlers [Reserved]
(Non-mandatory) Appendix C to Subpart L of Part 1926-List of National Consensus Standards
(Non-mandatory) Appendix D to Subpart L of Part 1926-List of Training Topics for Scaffold Erectors and Dismantlers
(Non-mandatory) Appendix E to Subpart L of Part 1926-Drawings and Illustrations

Subpart M-Fall Protection

§1926.500 Scope, application, and definitions applicable to this subpart.
§1926.501 Duty to have fall protection.
§1926.502 Fall protection systems criteria and practices.
§1926.503 Training requirements.
Appendix A to Subpart M of Part 1926-Determining Roof Widths
Appendix B to Subpart M of Part 1926-Guardrail Systems
Appendix C to Subpart M of Part 1926-Personal Fall Arrest Systems
Appendix D to Subpart M of Part 1926-Positioning Device Systems
Appendix E to Subpart M of Part 1926-Sample Fall Protection Plan

Subpart N-Helicopters, Hoists, Elevators, and Conveyors

§1926.550 [Reserved]
§1926.551 Helicopters.
§1926.552 Material hoists, personnel hoists, and elevators.
§1926.553 Base-mounted drum hoists.
§1926.554 Overhead hoists.
§1926.555 Conveyors.

Subpart O-Motor Vehicles, Mechanized Equipment, and Marine Operations

§1926.600 Equipment.
§1926.601 Motor vehicles.
§1926.602 Material handling equipment.
§1926.603 Pile driving equipment.
§1926.604 Site clearing.
§1926.605 Marine operations and equipment.
§1926.606 Definitions applicable to this subpart.

Subpart P-Excavations

§1926.650 Scope, application, and definitions applicable to this subpart.
§1926.651 Specific excavation requirements.
§1926.652 Requirements for protective systems.
Appendix A to Subpart P of Part 1926-Soil Classification
Appendix B to Subpart P of Part 1926-Sloping and Benching
Appendix C to Subpart P of Part 1926-Timber Shoring for Trenches
Appendix D to Subpart P of Part 1926-Aluminum Hydraulic Shoring for Trenches
Appendix E to Subpart P of Part 1926-Alternatives to Timber Shoring
Appendix F to Subpart P of Part 1926-Selection of Protective Systems

Subpart Q-Concrete and Masonry Construction

§1926.700 Scope, application, and definitions applicable to this subpart.
§1926.701 General requirements.
§1926.702 Requirements for equipment and tools.
§1926.703 Requirements for cast-in-place concrete.
§1926.704 Requirements for precast concrete.
§1926.705 Requirements for lift-slab construction operations.
§1926.706 Requirements for masonry construction.
Appendix A to Subpart Q of Part 1926-References to subpart Q of Part 1926

Subpart R-Steel Erection

§1926.750 Scope.
§1926.751 Definitions.
§1926.752 Site layout, site-specific erection plan and construction sequence.
§1926.753 Hoisting and rigging.
§1926.754 Structural steel assembly.
§1926.755 Column anchorage.
§1926.756 Beams and columns.
§1926.757 Open web steel joists.
§1926.758 Systems-engineered metal buildings.
§1926.759 Falling object protection.
§1926.760 Fall protection.
§1926.761 Training.
Appendix A to Subpart R of Part 1926-Guidelines for Establishing the Components of a Site-specific Erection Plan: Non-mandatory Guidelines for Complying With §1926.752(e) 
Appendix B to Subpart R of Part 1926 [Reserved] 
Appendix C to Subpart R of Part 1926-Illustrations of Bridging Terminus Points: Non-mandatory Guidelines for Complying With §§1926.757(a)(10) and §1926.757(c)(5)
Appendix D to Subpart R of Part 1926-Illustration of the Use of Control Lines To Demarcate Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying With §1926.760(c)(3)
Appendix E to Subpart R of Part 1926-Training: Non-mandatory Guidelines for Complying With §1926.761
Appendix F to Subpart R of Part 1926-Perimeter Columns: Non-Mandatory Guidelines for Complying With §1926.756(e) To Protect the Unprotected Side or Edge of a Walking/Working Surface
Appendix G to Subpart R of Part 1926-§1926.502 (b)-(e) Fall Protection Systems Criteria and Practices 
Appendix H to Subpart R of Part 1926-Double Connections: Illustration of a Clipped End Connection and a Staggered Connection: Non-Mandatory Guidelines for Complying With §1926.756(c)(1)

Subpart S-Underground Construction, Caissons, Cofferdams and Compressed Air

§1926.800 Underground construction.
§1926.801 Caissons.
§1926.802 Cofferdams.
§1926.803 Compressed air.
§1926.804 Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1926-Decompression Tables

Subpart T-Demolition

§1926.850 Preparatory operations.
§1926.851 Stairs, passageways, and ladders.
§1926.852 Chutes.
§1926.853 Removal of materials through floor openings.
§1926.854 Removal of walls, masonry sections, and chimneys.
§1926.855 Manual removal of floors.
§1926.856 Removal of walls, floors, and material with equipment.
§1926.857 Storage.
§1926.858 Removal of steel construction.
§1926.859 Mechanical demolition.
§1926.860 Selective demolition by explosives.

Subpart U-Blasting and the Use of Explosives

§1926.900 General provisions.
§1926.901 Blaster qualifications.
§1926.902 Surface transportation of explosives.
§1926.903 Underground transportation of explosives.
§1926.904 Storage of explosives and blasting agents.
§1926.905 Loading of explosives or blasting agents.
§1926.906 Initiation of explosive charges-electric blasting.
§1926.907 Use of safety fuse.
§1926.908 Use of detonating cord.
§1926.909 Firing the blast.
§1926.910 Inspection after blasting.
§1926.911 Misfires.
§1926.912 Underwater blasting.
§1926.913 Blasting in excavation work under compressed air.
§1926.914 Definitions applicable to this subpart.

Subpart V-Electric Power Transmission and Distribution

§1926.950 General.
§1926.951 Medical services and first aid.
§1926.952 Job briefing.
§1926.953 Enclosed spaces.
§1926.954 Personal protective equipment.
§1926.955 Portable ladders and platforms.
§1926.956 Hand and portable power equipment.
§1926.957 Live-line tools.
§1926.958 Materials handling and storage.
§1926.959 Mechanical equipment.
§1926.960 Working on or near exposed energized parts.
§1926.961 Deenergizing lines and equipment for employee protection.
§1926.962 Grounding for the protection of employees.
§1926.963 Testing and test facilities.
§1926.964 Overhead lines and live-line barehand work.
§1926.965 Underground electrical installations.
§1926.966 Substations.
§1926.967 Special conditions.
§1926.968 Definitions.
Appendix A to Subpart V of Part 1926 [Reserved]
Appendix B to Subpart V of Part 1926-Working on Exposed Energized Parts
Appendix C to Subpart V of Part 1926-Protection From Hazardous Differences in Electric Potential
Appendix D to Subpart V of Part 1926-Methods of Inspecting and Testing Wood Poles
Appendix E to Subpart V of Part 1926-Protection From Flames and Electric Arcs
Appendix F to Subpart V of Part 1926-Work-Positioning Equipment Inspection Guidelines
Appendix G to Subpart V of Part 1926-Reference Documents

Subpart W-Rollover Protective Structures; Overhead Protection

§1926.1000 Rollover protective structures (ROPS) for material handling equipment.
§1926.1001 Minimum performance criteria for rollover protective structures for designated scrapers, loaders, dozers, graders, and crawler tractors.
§1926.1002 Protective frames (roll-over protective structures, known as ROPS) for wheel-type agricultural and industrial tractors used in construction.
§1926.1003 Overhead protection for operators of agricultural and industrial tractors used in construction.
Appendix A to Subpart W of Part 1926-Figures W-14 through W-28

Subpart X-Stairways and Ladders

§1926.1050 Scope, application, and definitions applicable to this subpart.
§1926.1051 General requirements.
§1926.1052 Stairways.
§1926.1053 Ladders.
§§1926.1054-1926.1059 [Reserved]
§1926.1060 Training requirements.
Appendix A to Subpart X of Part 1926-Ladders

Subpart Y-Diving

General

§1926.1071 Scope and application.
§1926.1072 Definitions.
Personnel Requirements

§1926.1076 Qualifications of dive team.
General Operations Procedures

§1926.1080 Safe practices manual.
§1926.1081 Pre-dive procedures.
§1926.1082 Procedures during dive.
§1926.1083 Post-dive procedures.

Specific Operations Procedures

§1926.1084 SCUBA diving.
§1926.1085 Surface-supplied air diving.
§1926.1086 Mixed-gas diving.
§1926.1087 Liveboating.

Equipment Procedures and Requirements

§1926.1090 Equipment.

Recordkeeping

§1926.1091 Recordkeeping requirements.
Appendix A to Subpart Y of Part 1926-Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
Appendix B to Subpart Y of Part 1926-Guidelines for Scientific Diving

Subpart Z-Toxic and Hazardous Substances

§1926.1100 [Reserved]
§1926.1101 Asbestos.
§1926.1102 Coal tar pitch volatiles; interpretation of term.
§1926.1103 13 carcinogens (4-Nitrobiphenyl, etc.).
§1926.1104 alpha-Naphthylamine.
§1926.1105 [Reserved]
§1926.1106 Methyl chloromethyl ether.
§1926.1107 3,3'-Dichlorobenzidiene (and its salts).
§1926.1108 bis-Chloromethyl ether.
§1926.1109 beta-Naphthylamine.
§1926.1110 Benzidine.
§1926.1111 4-Aminodiphenyl.
§1926.1112 Ethyleneimine.
§1926.1113 beta-Propiolactone.
§1926.1114 2-Acetylaminofluorene.
§1926.1115 4-Dimethylaminoazobenzene.
§1926.1116 N-Nitrosodimethylamine.
§1926.1117 Vinyl chloride.
§1926.1118 Inorganic arsenic.
§1926.1126 Chromium (VI).
§1926.1127 Cadmium.
§1926.1128 Benzene.
§1926.1129 Coke oven emissions.
§1926.1144 1,2-dibromo-3-chloropropane.
§1926.1145 Acrylonitrile.
§1926.1147 Ethylene oxide.
§1926.1148 Formaldehyde.
§1926.1152 Methylene chloride.
§1926.1153 Respirable crystalline silica.

Subpart AA-Confined Spaces in Construction

§1926.1200 [Reserved]
§1926.1201 Scope.
§1926.1202 Definitions.
§1926.1203 General requirements.
§1926.1204 Permit-required confined space program.
§1926.1205 Permitting process.
§1926.1206 Entry permit.
§1926.1207 Training.
§1926.1208 Duties of authorized entrants.
§1926.1209 Duties of attendants.
§1926.1210 Duties of entry supervisors.
§1926.1211 Rescue and emergency services.
§1926.1212 Employee participation.
§1926.1213 Provision of documents to Secretary.

Subpart BB [Reserved]

Subpart CC-Cranes and Derricks in Construction

§1926.1400 Scope.
§1926.1401 Definitions.
§1926.1402 Ground conditions.
§1926.1403 Assembly/Disassembly-selection of manufacturer or employer procedures.
§1926.1404 Assembly/Disassembly-general requirements (applies to all assembly and disassembly operations).
§1926.1405 Disassembly-additional requirements for dismantling of booms and jibs (applies to both the use of manufacturer procedures and employer procedures).
§1926.1406 Assembly/Disassembly-employer procedures-general requirements.
§1926.1407 Power line safety (up to 350 kV)-assembly and disassembly.
§1926.1408 Power line safety (up to 350 kV)-equipment operations.
§1926.1409 Power line safety (over 350 kV).
§1926.1410 Power line safety (all voltages)-equipment operations closer than the Table A zone.
§1926.1411 Power line safety-while traveling under or near power lines with no load.
§1926.1412 Inspections.
§1926.1413 Wire rope-inspection.
§1926.1414 Wire rope-selection and installation criteria.
§1926.1415 Safety devices.
§1926.1416 Operational aids.
§1926.1417 Operation.
§1926.1418 Authority to stop operation.
§1926.1419 Signals-general requirements.
§1926.1420 Signals-radio, telephone or other electronic transmission of signals.
§1926.1421 Signals-voice signals-additional requirements.
§1926.1422 Signals-hand signal chart.
§1926.1423 Fall protection.
§1926.1424 Work area control.
§1926.1425 Keeping clear of the load.
§1926.1426 Free fall and controlled load lowering.
§1926.1427 Operator qualification and certification.
§1926.1428 Signal person qualifications.
§1926.1429 Qualifications of maintenance & repair employees.
§1926.1430 Training.
§1926.1431 Hoisting personnel.
§1926.1432 Multiple-crane/derrick lifts-supplemental requirements.
§1926.1433 Design, construction and testing.
§1926.1434 Equipment modifications.
§1926.1435 Tower cranes.
§1926.1436 Derricks.
§1926.1437 Floating cranes/derricks and land cranes/derricks on barges.
§1926.1438 Overhead & gantry cranes.
§1926.1439 Dedicated pile drivers.
§1926.1440 Sideboom cranes.
§1926.1441 Equipment with a rated hoisting/lifting capacity of 2,000 pounds or less.
§1926.1442 Severability.
Appendix A to Subpart CC of Part 1926-Standard Hand Signals
Appendix B to Subpart CC of Part 1926-Assembly/Disassembly: Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement
Appendix C to Subpart CC of Part 1926-Operator Certification: Written Examination: Technical Knowledge Criteria
Appendix A to Part 1926-Designations for General Industry Standards Incorporated Into Body of Construction Standards

 


• Part Number: 1910
• Part Title: Occupational Safety and Health Standards
• Standard Number: 1910
• Title: Table of Contents
• GPO Source: e-CFR

PART 1910 — OCCUPATIONAL SAFETY AND HEALTH STANDARDS

Subpart A—General

§1910.1 Purpose and scope.
§1910.2 Definitions.
§1910.3 Petitions for the issuance, amendment, or repeal of a standard.
§1910.4 Amendments to this part.
§1910.5 Applicability of standards.
§1910.6 Incorporation by reference.
§1910.7 Definition and requirements for a nationally recognized testing laboratory.
§1910.8 OMB control numbers under the Paperwork Reduction Act.
§1910.9 Compliance duties owed to each employee.

Subpart B—Adoption and Extension of Established Federal Standards

§1910.11 Scope and purpose.
§1910.12 Construction work.
§1910.15 Shipyard employment.
§1910.16 Longshoring and marine terminals.
§1910.17 Effective dates.
§1910.18 Changes in established Federal standards.
§1910.19 Special provisions for air contaminants.

Subpart C [Reserved]

Subpart D—Walking-Working Surfaces

§1910.21 Scope and definitions.
§1910.22 General requirements.
§1910.23 Ladders.
§1910.24 Step bolts and manhole steps.
§1910.25 Stairways.
§1910.26 Dockboards.
§1910.27 Scaffolds and rope descent systems.
§1910.28 Duty to have fall protection and falling object protection.
§1910.29 Fall protection systems and falling object protection-criteria and practices.
§1910.30 Training requirements.

Subpart E—Exit Routes and Emergency Planning

§1910.33 Table of contents.
§1910.34 Coverage and definitions.
§1910.35 Compliance with alternate exit-route codes.
§1910.36 Design and construction requirements for exit routes.
§1910.37 Maintenance, safeguards, and operational features for exit routes.
§1910.38 Emergency action plans.
§1910.39 Fire prevention plans.
Appendix to Subpart E of Part 1910-Exit Routes, Emergency Action Plans, and Fire Prevention Plans

Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

§1910.66 Powered platforms for building maintenance.
§1910.67 Vehicle-mounted elevating and rotating work platforms.
§1910.68 Manlifts.

Subpart G—Occupational Health and Environmental Control

§1910.94 Ventilation.
§1910.95 Occupational noise exposure.
§1910.97 Nonionizing radiation.
§1910.98 Effective dates.

Subpart H—Hazardous Materials

§1910.101 Compressed gases (general requirements).
§1910.102 Acetylene.
§1910.103 Hydrogen.
§1910.104 Oxygen.
§1910.105 Nitrous oxide.
§1910.106 Flammable liquids.
§1910.107 Spray finishing using flammable and combustible materials.
§1910.108 [Reserved]
§1910.109 Explosives and blasting agents.
§1910.110 Storage and handling of liquefied petroleum gases.
§1910.111 Storage and handling of anhydrous ammonia.
§§1910.112-1910.113 [Reserved]
§1910.119 Process safety management of highly hazardous chemicals.
§1910.120 Hazardous waste operations and emergency response.
§1910.121 [Reserved]

Dipping and Coating Operations

§1910.122 Table of contents.
§1910.123 Dipping and coating operations: Coverage and definitions.
§1910.124 General requirements for dipping and coating operations.
§1910.125 Additional requirements for dipping and coating operations that use flammable liquids or liquids with flashpoints greater than 199.4 °F (93 °C).
§1910.126 Additional requirements for special dipping and coating operations.

Subpart I—Personal Protective Equipment

§1910.132 General requirements.
§1910.133 Eye and face protection.
§1910.134 Respiratory protection.
§1910.135 Head protection.
§1910.136 Foot protection.
§1910.137 Electrical protective equipment.
§1910.138 Hand protection.
Appendix A to Subpart I of Part 1910-References for Further Information (Non-mandatory)
Appendix B to Subpart I of Part 1910-Nonmandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection

Subpart J—General Environmental Controls

§1910.141 Sanitation.
§1910.142 Temporary labor camps.
§1910.143 Nonwater carriage disposal systems. [Reserved]
§1910.144 Safety color code for marking physical hazards.
§1910.145 Specifications for accident prevention signs and tags.
§1910.146 Permit-required confined spaces.
§1910.147 The control of hazardous energy (lockout/tagout).

Subpart K—Medical and First Aid

§1910.151 Medical services and first aid.
§1910.152 [Reserved]

Subpart L—Fire Protection

§1910.155 Scope, application and definitions applicable to this subpart.
§1910.156 Fire brigades.

Portable Fire Suppression Equipment

§1910.157 Portable fire extinguishers.
§1910.158 Standpipe and hose systems.

Fixed Fire Suppression Equipment

§1910.159 Automatic sprinkler systems.
§1910.160 Fixed extinguishing systems, general.
§1910.161 Fixed extinguishing systems, dry chemical.
§1910.162 Fixed extinguishing systems, gaseous agent.
§1910.163 Fixed extinguishing systems, water spray and foam.

Other Fire Protection Systems

§1910.164 Fire detection systems.
§1910.165 Employee alarm systems.
Appendices to Subpart L of Part 1910-Note
Appendix A to Subpart L of Part 1910-Fire Protection
Appendix B to Subpart L of Part 1910-National Consensus Standards
Appendix C to Subpart L of Part 1910-Fire Protection References For Further Information
Appendix D to Subpart L of Part 1910-Availability of Publications Incorporated by Reference in Section 1910.156 Fire Brigades
Appendix E to Subpart L of Part 1910-Test Methods for Protective Clothing

Subpart M—Compressed Gas and Compressed Air Equipment

§§1910.166-1910.168 [Reserved]
§1910.169 Air receivers.

Subpart N—Materials Handling and Storage

§1910.176 Handling materials-general.
§1910.177 Servicing multi-piece and single piece rim wheels.
§1910.178 Powered industrial trucks.
§1910.179 Overhead and gantry cranes.
§1910.180 Crawler locomotive and truck cranes.
§1910.181 Derricks.
§1910.183 Helicopters.
§1910.184 Slings.

Subpart O—Machinery and Machine Guarding

§1910.211 Definitions.
§1910.212 General requirements for all machines.
§1910.213 Woodworking machinery requirements.
§1910.214 Cooperage machinery. [Reserved]
§1910.215 Abrasive wheel machinery.
§1910.216 Mills and calenders in the rubber and plastics industries.
§1910.217 Mechanical power presses.
§1910.218 Forging machines.
§1910.219 Mechanical power-transmission apparatus.

Subpart P—Hand and Portable Powered Tools and Other Hand-Held Equipment

§1910.241 Definitions.
§1910.242 Hand and portable powered tools and equipment, general.
§1910.243 Guarding of portable powered tools.
§1910.244 Other portable tools and equipment.

Subpart Q—Welding, Cutting and Brazing

§1910.251 Definitions.
§1910.252 General requirements.
§1910.253 Oxygen-fuel gas welding and cutting.
§1910.254 Arc welding and cutting.
§1910.255 Resistance welding.

Subpart R—Special Industries

§1910.261 Pulp, paper, and paperboard mills.
§1910.262 Textiles.
§1910.263 Bakery equipment.
§1910.264 Laundry machinery and operations.
§1910.265 Sawmills.
§1910.266 Logging operations.
§1910.268 Telecommunications.
§1910.269 Electric power generation, transmission, and distribution.
§1910.272 Grain handling facilities.

Subpart S—Electrical

General

§1910.301 Introduction.

Design Safety Standards for Electrical Systems

§1910.302 Electric utilization systems.
§1910.303 General.
§1910.304 Wiring design and protection.
§1910.305 Wiring methods, components, and equipment for general use.
§1910.306 Specific purpose equipment and installations.
§1910.307 Hazardous (classified) locations.
§1910.308 Special systems.
§§1910.309-1910.330 [Reserved]

Safety-Related Work Practices

§1910.331 Scope.
§1910.332 Training.
§1910.333 Selection and use of work practices.
§1910.334 Use of equipment.
§1910.335 Safeguards for personnel protection.
§§1910.336-1910.360 [Reserved]

Safety-Related Maintenance Requirements

§§1910.361-1910.380 [Reserved]
Safety Requirements for Special Equipment

§§1910.381-1910.398 [Reserved]

Definitions

§1910.399 Definitions applicable to this subpart.
Appendix A to Subpart S of Part 1910- References for Further Information

Subpart T—Commercial Diving Operations

General

§1910.401 Scope and application.
§1910.402 Definitions.

Personnel Requirements

§1910.410 Qualifications of dive team.

General Operations Procedures

§1910.420 Safe practices manual.
§1910.421 Pre-dive procedures.
§1910.422 Procedures during dive.
§1910.423 Post-dive procedures.

Specific Operations Procedures

§1910.424 SCUBA diving.
§1910.425 Surface-supplied air diving.
§1910.426 Mixed-gas diving.
§1910.427 Liveboating.

Equipment Procedures and Requirements

§1910.430 Equipment.

Recordkeeping

§1910.440 Recordkeeping requirements.
Appendix A to Subpart T of Part 1910-Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions
Appendix B to Subpart T of Part 1910-Guidelines for Scientific Diving
Appendix C to Subpart T of Part 1910-Alternative Conditions Under §1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)

Subparts U—Y [Reserved]